Custom Printed Pre-Opened Poly Bags on a Roll for Automated Packing Machines

US$0.01–0.23 / piece

Custom printed pre-opened poly bags on a roll for automatic and semi-automatic bagging machines, including bags for Autobag® machines, Sharp Packaging (MAX), PDC International, FAS and tabletop equipment. Choose 1.5, 2, 3, 4 or 6 mil film, print your logo, part numbers or handling instructions, and add a white front for label visibility. Bag size, perforation, core and unwind direction are matched to your machine before production, for reliable, jam-free feeding.

Compatible Bagging Equipment

  • Autobag®
  • APS
  • PDC International
  • Sharp Packaging (MAX)
  • FAS

Send us your machine make/model or current bag specification.

Ordering & Supply Information

MOQ
30,000 pieces
Lead Time
15–35 working days after design confirmation
Trade Term
FOB Shenzhen
Shipping Port
Shenzhen / Guangzhou
Payment
30% deposit, 70% before shipment
Payment Methods
T/T / L/C / PayPal / Western Union
Packaging
Export carton boxes
Overall Supply Capacity
Up to 8,000,000 pieces per week
Summarize this product:

Custom Printed Pre-Opened Bags on a Roll, Made Around Your Machine

Orbapack manufactures custom printed pre-opened poly bags on a roll for roll-fed automated and semi-automated bagging equipment. We define the bag size, perforation, roll core and unwind direction from your machine and packing requirements, so you receive a roll built for your setup instead of a generic format. Printing can carry your branding, part numbers, handling instructions or product identification.

For plain clear film, see clear and custom printed pre-opened bags on a roll. For a white front and clear back, see 2 mil white / clear pre-opened bags on a roll.

Printed Bags for Autobag® and Other Bagging Machines

We manufacture pre-opened roll bags for these machines:

  • Autobag® / APS
  • Sharp Packaging (MAX)
  • PDC International
  • FAS

Send your machine make and model, or the specification of the bags currently running on your line.

Autobag® and other brand names on this page are trademarks of their respective owners. Orbapack manufactures compatible bags and is not affiliated with or endorsed by these companies unless explicitly stated.

What Must Match Between the Bag and the Machine

Automated bagging equipment feeds, presents and separates bags in a repeating cycle. For reliable feeding, these points need to match:

  • Roll core and unwind direction: core dimensions, winding and unwind direction must fit how the machine feeds the roll
  • Perforation: position and separation characteristics must suit the machine’s feeding and separation process
  • Bag pitch / repeat length: bag length and repeat must match the machine’s feed and index requirements
  • Machine-reading marks: registration or sensor marks can be added when your setup requires them

Not sure how to match a bag to your machine? Read our selection guide for pre-opened poly bags on rolls.

Printing Options

Printed pre-opened bags can carry branding, part numbers, handling instructions, product identification or other approved artwork. Up to 8 colors are available. Send with your inquiry:

  • Artwork file
  • Colors and print coverage
  • Orientation and repeat
  • Registration requirements

A white front is available for label or marking visibility.

Thickness Options

Thickness Typical use
1.5 mil Light parts, literature, small kits
2 mil General industrial and e-commerce packing
3 mil Heavier or slightly sharp parts, printed bags needing extra stiffness
4 mil Heavy parts, hardware, fasteners
6 mil Very heavy or sharp items

Final thickness depends on the product weight, edges and handling. Send the product and we confirm.

Available Sizes

The sizes below are producible examples, not fixed limits. Final size must allow for the product, loading clearance, seal area, separation and machine setup.

Width × length Metric size Example use
4 × 6 in 102 × 152 mm Small parts and identification packs
4 × 8 in 102 × 203 mm Longer components or instruction packs
6 × 8 in 152 × 203 mm Component and assembly kits
8 × 10 in 203 × 254 mm Larger industrial packs
10 × 15 in 254 × 381 mm Large-format packed items

For other sizes, see custom size pre-opened bags on a roll.

Custom pre-opened poly bags used in an automated packing application

 

Material and format options for custom pre-opened poly bags

Add Features

Applications

  • Hardware and industrial components: pre-opened presentation supports repeat loading of counted parts
  • Electronic components: the roll format supports repeat packing when the specified material meets the component-handling requirement
  • Assembly and component kits: custom sizes contain grouped parts for the next production step
  • Product identification: optional printing carries approved part or handling information

Bags on a Roll, Poly Tubing or Fan-Folded Bags: How They Compare

Pre-opened bags on a roll Poly tubing Fan-folded bags in a box
How it works Pre-opened, perforated bags loaded and sealed by an automatic bagger Continuous tube cut and sealed to length on the machine Flat bags stacked in a box and opened by hand or a dispenser
Speed Fast, high-volume automated loading Fast when the machine cuts and seals the tube Slower, mostly manual
Bag size Fixed per roll Flexible, cut to length Fixed per box
Cost per bag Usually higher than tubing, offset by lower labor Usually the lowest material cost Depends on volume
Best for Repeat, high-volume packing on roll-fed baggers Variable lengths and the lowest film cost Low volume and hand packing

The best choice depends on your volume, your equipment and your labor cost. If you already run a roll-fed bagger, bags on a roll are the format the machine is built for.

"Custom

Why Choose Orbapack for Printed Pre-Opened Roll Bags

  • Built around your machine setup: we define the bag and roll from your equipment information instead of treating every bagging application as one format
  • Practical lead time: 15–35 working days after design or specification confirmation
  • Custom samples: typically prepared in 7–10 working days
  • Free stock samples: inspect the bag construction before a custom order
  • Documented supply capacity: up to 8,000,000 pieces per week; scheduling for a specific order is confirmed during quotation

What to Send Us for a Quote

  • Machine brand and model
  • Current bag specification, if available
  • Bag width and length
  • Film thickness and material requirement
  • Packed product and quantity per bag
  • Order quantity
  • Roll, core and perforation requirements
  • Artwork, colors and coverage when printing is required
  • Other special requirements

Frequently Asked Questions

How do I choose the right custom bag size for my product and machine?

Measure your product at its widest and longest point, then add allowance for loading clearance, the seal area and the separation edge. Next check your machine’s limits: bag width and length range, maximum roll diameter, core size and feed direction. The easiest way is to send us your machine make and model, plus the product or a sample packed bag, and we calculate the size and roll configuration for you.

Which automatic bagging machines are compatible (Autobag, Sharp, Titan, Advance Poly, PDC, FAS)?

We manufacture pre-opened roll bags for Autobag® / APS, Sharp Packaging (MAX), Titan, Advance Poly, PDC International and FAS machines, and for other roll-fed pre-opened bag equipment. Compatibility depends on matching the roll to your machine, so we confirm the core, bag pitch, perforation and feed direction before production. Send your machine make and model, or the specification of the bags running on your line. Brand names belong to their owners and are used only to identify compatible machines.

Which is better and cheaper: bags on a roll, poly tubing or fan-folded bags in a box?

It depends on your volume and equipment. Poly tubing usually has the lowest film cost per bag and flexible lengths, but needs a machine that cuts and seals it. Fan-folded bags in a box suit low volume and hand packing. Pre-opened bags on a roll usually cost more per bag than tubing, but they load fast on an automatic bagger and cut labor, so they are the better choice for high-volume, repeat packing on a roll-fed machine.

Does using non-genuine (compatible) bags void the machine warranty or hurt performance?

Warranty terms are set by each machine maker, so check your warranty documents or ask the manufacturer in writing whether third-party bags are allowed. On performance, bags that match your machine’s core, perforation, bag pitch and film specification run reliably, and poorly matched bags can cause jams. We match each roll to your machine, and free stock samples and custom samples let you test on your own line before a bulk order.

How can I order custom printed pre-opened bags on a roll with my logo?

Send your artwork file, colors, print coverage, orientation, repeat and registration requirements with your inquiry. We print up to 8 colors on the bag, and a white front is available for labels or markings.

What thickness should I choose for printed pre-opened bags?

Use 1.5 mil for light items, 2 mil for general packing, 3 mil for heavier or slightly sharp parts, and 4 to 6 mil for heavy or sharp items. Send your product and we confirm the right gauge.

What is a pre-opened poly bag on a roll, and which machines use it?

A pre-opened poly bag on a roll is a perforated bag with an open mouth, supplied on a continuous roll. Roll-fed automatic and semi-automatic bagging machines, such as Autobag®-type machines, load the product, seal the bag and separate it from the roll in one cycle. The roll, bag size and perforation must match the machine.

How long does production take, and are samples free?

Lead time is 15–35 working days after design confirmation, and custom samples take about 7–10 working days. Free stock samples are available so you can inspect the bag construction before a custom order.

Request a Quote

Send your machine make and model, bag size, thickness and artwork through the Request a Quote page, or browse all pre-opened bags on a roll.

WHATSAPP