VCI Pre-Opened Poly Bags on Roll
Skip the oil coating: VCI (vapor corrosion inhibitor) film protects metal parts from rust using vapor instead of a physical coating, so parts come out of the bag clean and ready for assembly — no degreasing step. Built on our pre-opened, perforated roll format for automated bagging lines, and matched to your metal type, part geometry, and shipping/storage conditions. MOQ 30,000 pieces, 15–35 day lead time, FOB Shenzhen.
How VCI Protection Works
Once sealed, nano-scale VCI molecules in the film slowly vaporize inside the bag and settle as an invisible, molecule-thin layer across every metal surface — including threads and blind holes that oil coating can’t reach by hand. Open the bag, and the vapor disperses into the air with no residue: parts go straight to assembly, no cleaning required.
Built for Metal — Not Just Rust Protection
- Pre-opened, perforated roll: front pre-slit for the machine’s air jet to open automatically; perforated back for a clean one-motion tear between bags
- Reinforced tubular seam: seamless blown construction with a heavy-duty bottom seal, so loaded metal parts don’t split the bag at the seam
Match the Film to Your Metal
VCI formulation depends on what you’re protecting:
| Metal type | Film | Example parts |
|---|---|---|
| Ferrous (iron, steel, cast iron) | Blue/green VCI film | Bolts, cast components |
| Non-ferrous (copper, aluminum, zinc) | Non-ferrous VCI formulation | Aluminum housings, brass fittings |
| Mixed/multi-metal assemblies | Multi-metal VCI system | Motors, connector assemblies with circuit boards |
Standard gauge is 3–4 mil (75–100 microns) for puncture resistance during handling. Protection duration depends on formulation, thickness, and your storage/shipping conditions (including ocean freight) — tell us your route and timeline and we’ll confirm the spec.
Need MIL-PRF-22019/22020 or REACH/RoHS compliance? Tell us your requirement and we’ll confirm what we can support before quoting.
Available Sizes
| Width × Length | Typical use |
|---|---|
| 4″ × 6″ | Small metal parts |
| 6″ × 10″ | Long hardware |
| 8″ × 10″ | Machined components |
| 8″ × 12″ | Automotive parts |
| 10″ × 15″ | Large industrial parts |
Custom widths and lengths available.

Runs on Autobag®, APS, PDC, Sharp (MAX), and FAS Equipment
VCI film’s slip and feed characteristics differ from standard PE, so we match roll core, perforation, and pitch to your machine before production. Send us your equipment’s make/model or a current bag sample.
Brand names are trademarks of their respective owners; we manufacture compatible bags and are not affiliated with these companies.
Applications
Machined parts, fasteners, automotive components, and bearings — anywhere metal needs corrosion protection during storage or shipment without a manual oiling step

Frequently Asked Questions
What are VCI bags used for?
Protecting metal parts from corrosion during storage and shipping — automotive components, machined parts, fasteners, bearings — without an oil or grease coating.
Do parts need cleaning after a VCI bag, before assembly?
No — VCI vapor disperses when the bag opens, leaving no residue.
Can one VCI bag protect mixed metals, like steel and aluminum together?
Not with a single-metal formulation — tell us every metal in the assembly and we’ll confirm a multi-metal system.
What’s the standard thickness and MOQ?
3–4 mil is standard for automated metal-parts packing. MOQ is 30,000 pieces.
Need a bag for visible, non-metal products instead? See Clear Pre-Opened Bags on a Roll.














