Pre-Opened Bags on a Roll for Electronic Components | Clear, Anti-Static & ESD Options
Orbapack manufactures pre-opened bags on a roll for electronic components, made to fit automatic bagging lines. This page covers the clear polyethylene grade for parts that are not static-sensitive, such as cables, connectors, wire harnesses and accessory kits. For static-sensitive parts we also make anti-static (pink), static shielding (silver) and VCI grades, linked below.
- Ideal for: cables, connectors, wire harnesses, small electronic parts, accessory and repair kits
- Film options: clear, anti-static, static shielding, VCI
- Thickness: 1.5 / 2 / 3 / 4 mil
- Sizes: 2″ × 3″ to 14″ × 18″ , custom sizes available
- Options: vent holes, white print block, custom printing, suffocation warning
- MOQ 30,000 pieces | Lead time 15–35 working days after design confirmation
Which roll bag fits your electronic part?
Not every electronic part needs the same protection. Choose by what the part needs to survive.
| Your part | Main risk | Recommended film | Where to look |
|---|---|---|---|
| Cables, connector housings, screws, mechanical housings, accessory and repair kits | Identification, scratching | Clear poly | This page |
| Low-sensitivity electronic parts, or parts moving into an ESD-controlled area | Bag generating static | Anti-static (pink) | Anti-Static Pre-Opened Bags on a Roll |
| PCBs, ICs, capacitors, graphics cards | Static from outside the bag, EMI | Static shielding (silver) | ESD Protective Pre-Opened Bags on a Roll |
| Exposed metal pins and terminals, sea freight | Corrosion | VCI film | VCI Pre-Opened Bags on a Roll |
| Static-sensitive and corrosion-prone | Both | ESD plus VCI (custom) | Contact us |
Note: moisture barrier bags used for dry-packing moisture-sensitive devices are a different product category from pre-opened roll bags.
Clear pre-opened roll bags: specifications
| Item | Detail |
|---|---|
| Format | Pre-opened, perforated bags on a roll |
| Material | LDPE / LLDPE |
| Thickness | 1.5 / 2 / 3 / 4 mil |
| Width × length | 2″ × 3″ to 14″ × 18″, custom sizes available |
| Options | Vent holes, white print block, custom print, suffocation warning |
| MOQ | 30,000 pieces per size and spec |
| Lead time | 15–35 working days after design confirmation |
| Trade term | FOB Shenzhen |
Size and thickness reference
| Size (W × L) | Suggested thickness | Typical parts |
|---|---|---|
| 2″ × 3″ to 4″ × 6″ | 1.5–2 mil | SMD parts, small LEDs, screws, pins |
| 6″ × 8″ to 8″ × 10″ | 2–3 mil | Relays, sensors, switches, adapters, harnesses |
| 10″ × 12″ to 14″ × 18″ | 3–4 mil | Large boards, power supplies, heavy cable assemblies |
The thickness shown is a starting point. Part weight, sharp pins and handling decide the final gauge.
Machine fit
We match the roll to your machine rather than claiming universal fit. Send your machine make and model (Autobag-type, Sharp, Titan or others) or a sample bag, and we confirm these before production:
- Core inner diameter and roll outer diameter
- Bag pitch and perforation position
- Opening style and feed direction
- Sealing method and film slip level


Frequently asked questions
What thickness (mil) and size should I choose for electronic components? Is 2 mil enough?
For smooth, plastic-housed parts such as adapters and cable sets, 2 mil is usually adequate. For PCBs and parts with sharp solder pins, pin headers or metal leads, 3–4 mil is safer, because thinner film can be punctured during automated loading and transit. Standard widths run from [2″ × 3″ to 14″ × 18″], and custom sizes are available. Send a sample part and we will recommend a gauge.
Do electronic components need anti-static bags, or is clear poly OK?
Clear standard polyethylene is suitable for parts that are not static-sensitive, such as screws, mechanical housings, cables and connector housings. It should not be the primary package for ESD-sensitive devices such as ICs, semiconductors and PCBs, because ordinary polyethylene can build up a triboelectric charge. Anti-static (pink) film stops the bag itself from generating static but does not shield against external fields. Static shielding (silver) bags add that shielding. Which level you need depends on your own ESD control requirements, so confirm them before ordering.
Why do pre-opened bags jam on automatic bagging machines, and how do I prevent it?
Jams on Autobag-type machines usually come from inconsistent perforation pitch, a mismatch between bag pitch and machine settings, film that clings to rollers through static, or an unsuitable slip and anti-block level so the bag mouth does not open cleanly. We control perforation pitch and film slip for each order and match the roll to your machine. Send your machine model or a sample bag for a fit check.
Do electronic component bags need vent holes?
Often yes. A fully automatic bagger heat-seals the bag and traps air inside. When bags are stacked or compressed in a carton, an unvented thin bag can burst. A vent hole punched during manufacturing lets the air escape after sealing so bags pack down tightly. See Vented Pre-Opened Bags on a Roll.
Are these bags RoHS or REACH compliant, amine-free, and ESD tested?
Compliance is confirmed per order, not assumed. We can provide material declarations on request, and third-party RoHS, REACH or ESD test reports can be arranged for your specific grade and quantity. The clear grade on this page is not an ESD product; ESD performance applies to the anti-static and shielding grades on their own pages. Amine-free film is often requested because amine-based anti-static additives can affect some plastics, so state this in your inquiry.
What are the MOQ, price and lead time?
MOQ is 30,000 pieces per size and specification. Lead time is 15–35 working days after design confirmation, and supply capacity is up to 8,000,000 pieces per week. Price depends on size, thickness, printing and quantity.
What print requirements apply for Amazon FBA?
Amazon’s poly bag rules call for transparent bags at least 1.5 mil thick, with a suffocation warning when the opening is 5 inches or larger, measured flat. We can print the warning directly on the bag and add a white print block for in-line barcodes or lot numbers. Please confirm current requirements on Amazon Seller Central before ordering.
What do I need to send for a quote?
Part type and size, whether it is static-sensitive, preferred film (clear, anti-static, shielding or VCI), bag size, thickness, quantity, printing, and your bagging machine make and model. A sample bag or drawing speeds up confirmation.














